|
Product parameters
| Model | JTA-JUTI-X | | PCB Spec. | PCB Dimension | 50x50mm – 440x480mm | | PCB Thickness | 0.5mm – 5mm(Standard) | | PCB Component height | Top 25mm Bottom 50mm | | PCB Warp | ±3mm | Optical
Parameter | Resolution | 15μm(Standard)
10μm/12μm,Option | | Speed | 0.25 sec/FOV | | Camera Spec. | 5M High Speed Color Camera | | Optical Lens | Telecentric Optical Lens | | Light-Source | Multis pectral Super speed RGB+W Light Source | | Inspection Category | Component Inspection | Missing, Rolling, Shifting，Polarity Error，Wrong Part, Damaged, Bended,PCB Abnormal, Residua, Glue Overflow | | Solder Inspection | Excess Solder, Insufficient Solder，Bridging，Lifting，Solder Balls，Soldering Abnormal | | Special Inspection Items | Can Check Solder Paste and Epoxy Glue Process, Soldering Quality; Checking Floating Componebts Cold Joint by 3D | | Hardware | X，Y Table Positioning Accuracy | ±0.01mm | | X，Y Table Speed | 1000mm/s | | PCB Loading | Defined Mode: R->L / L->R,L->L,R->R (Standard) | | PCB width adjustment | By AUTO + By Manual (Standard) | | Main Frame Body | Whole Cast Iron | | Screwing-shaft | High precision ball screw | | Rail | High Level Rail | | Driver | AC Servo Motor | | OperatingSystem | Win 7 Professional | | Display | 22” LCDs | | PowerSupply | AC 200-240V1Φ 50/60HZ Single-phase | | Power | 1.7KW | | Pressure | 0.5MPa | | Dimension (W*D*H) | 947x1321x1547mm | | Weight (KG) | 1050KG＋/－10KG | | Software | InspectionMethod | The Eigenvector Analysis & OCV Silkscreen Algorithm | | InspectionAngleArea | 0-360°，Accuracy=1° | | MarkingFunction | One Board Marking & Multi-pieces Board Marking & Bad Marking, etc. | | ProgrammingMode | 1.CAD Coordinate Loading 2.Component Database Auto-index
3.Auto-programmingby Intelligent Software | | RemoteControl | Network Monitoring: Offline Debugging, Online Monitoring & Manipulating, Remote Realized Examing | | DataRecording | Auto-generated Statistical Process Controlling Data (SPC) & Report | | Option | Barcode Scanner 1D/2D (H/W) | | Quality Tracing (Option) | Offline Programming System (PC) | | Three-point-verification System (Option) | 1D/2D Barcode Reading (S/W + License) | | The above contents are subject to change without further notice! |
JTA-JUTI-MX| Model | JTA-JUTI-MX | | PCB Spec. | PCB Dimension | 50x50mm – 440x480mm | | PCB Thickness | 0.5mm – 5mm(Standard) | | PCB Component height | Top 25mm Bottom 50mm | | PCB Warp | ±3mm | Optical
Parameter | Resolution | 12μm(Standard)
5μm/10μm,Option | | Speed | 0.25 sec/FOV | | Camera Spec. | 12M High Speed Color Camera | | Optical Lens | Telecentric Optical Lens | | Light-Source | Multis pectral Super speed RGB+W Light Source | | Inspection Category | Component Inspection | Missing, Rolling, Shifting, Polarity Error, Wrong Part, Damaged, Bended, PCB Abnormal, Residua, Glue Overflow | | Solder Inspection | Excess Solder, Insufficient Solder，Bridging，Lifting，Solder Balls，Soldering Abnormal | | Special Inspection Items | Can Check Solder Paste and Epoxy Glue Process, Soldering Quality; Checking Floating Componebts Cold Joint by 3D | | Hardware | X，Y Table Positioning Accuracy | ±0.01mm | | X，Y Table Speed | 1000mm/s | | PCB Loading | Defined Mode: R->L / L->R,L->L,R->R (Standard) | | PCB width adjustment | By AUTO + By Manual (Standard) | | Main Frame Body | Whole Cast Iron | | Screwing-shaft | High precision ball screw | | Rail | High Level Rail | | Driver | AC Servo Motor | | OperatingSystem | Win 7 Professional | | Display | 22” LCDs | | PowerSupply | AC 200-240V1Φ 50/60HZ Single-phase | | Power | 1.7KW | | Pressure | 0.5MPa | | Dimension (W*D*H) | 947x1321x1547mm | | Weight (KG) | 1050KG＋/－10KG | | Software | InspectionMethod | The Eigenvector Analysis & OCV Silkscreen Algorithm | | InspectionAngleArea | 0-360°，Accuracy=1° | | MarkingFunction | One Board Marking & Multi-pieces Board Marking & Bad Marking, etc. | | ProgrammingMode | 1.CAD Coordinate Loading 2.Component Database Auto-index
3.Auto-programmingby Intelligent Software | | RemoteControl | Network Monitoring: Offline Debugging, Online Monitoring & Manipulating, Remote Realized Examing | | DataRecording | Auto-generated Statistical Process Controlling Data (SPC) & Report | | Option | Barcode Scanner 1D/2D (H/W) | Pin Equipment | | Quality Tracing (Option) | Offline Programming System (PC) | | Three-point-verification System (Option) | 1D/2D Barcode Reading (S/W + License) | | The above contents are subject to change without further notice! |
JTA-JUTI-DX | Model | JTA-JUTI-DX |
| | PCB Spec. | PCB Dimension | Double Rail 50x50mm-440x300mm
Single rail 50x50mm-440x690mm | | PCB Thickness | 0.5mm – 5mm(Standard) |
| | PCB Component height | Top 25mm Bottom 50mm |
| | PCB Warp | ±3mm |
| Optical
Parameter | Resolution | 12μm(Standard)
5μm/10μm,Option | | Speed | 0.25 sec/FOV |
| | Camera Spec. | 12M High Speed Color Camera |
| | Optical Lens | Telecentric Optical Lens |
| | Light-Source | Multis pectral Super speed RGB+W Light Source |
| | Inspection Category | Component Inspection | Missing, Rolling, Shifting, Polarity Error, Wrong Part, Damaged, Bended, PCB Abnormal, Residua, Glue Overflow | | Solder Inspection | Excess Solder, Insufficient Solder，Bridging，Lifting，Solder Balls，Soldering Abnormal |
| | Special Inspection Items | Can Check Solder Paste and Epoxy Glue Process, Soldering Quality; Checking Floating Componebts Cold Joint by 3D |
| | Hardware | X，Y Table Positioning Accuracy | ±0.01mm | | X，Y Table Speed | 1000mm/s |
| | PCB Loading | Defined Mode: R->L / L->R,L->L,R->R (Standard) |
| | PCB width adjustment | By AUTO + By Manual (Standard) |
| | Main Frame Body | Whole Cast Iron |
| | Screwing-shaft | High precision ball screw |
| | Rail | High Level Rail |
| | Driver | AC Servo Motor |
| | OperatingSystem | Win 7 Professional |
| | Display | 22” LCDs |
| | PowerSupply | AC 200-240V1Φ 50/60HZ Single-phase |
| | Power | 2.2KW |
| | Pressure | 0.5MPa |
| | Dimension (W*D*H) | 947x1433x1547mm |
| | Weight (KG) | 1050KG＋/－10KG |
| | Software | InspectionMethod | The Eigenvector Analysis & OCV Silkscreen Algorithm | | InspectionAngleArea | 0-360°，Accuracy=1° |
| | MarkingFunction | One Board Marking & Multi-pieces Board Marking & Bad Marking, etc. |
| | ProgrammingMode | 1.CAD Coordinate Loading 2.Component Database Auto-index
3.Auto-programmingby Intelligent Software |
| | RemoteControl | Network Monitoring: Offline Debugging, Online Monitoring & Manipulating, Remote Realized Examing |
| | DataRecording | Auto-generated Statistical Process Controlling Data (SPC) & Report |
| | Option | Barcode Scanner 1D/2D (H/W) | Pin Equipment | | Quality Tracing (Option) | Offline Programming System (PC) |
| | Three-point-verification System (Option) | 1D/2D Barcode Reading (S/W + License) |
| | The above contents are subject to change without further notice! |
JTA-JUTI-MXL | Model | JTA-JUTI-MXL |
| | PCB Spec. | PCB Dimension | 50x50mm – 620x690mm | | PCB Thickness | 0.5mm – 5mm(Standard) |
| | PCB Component height | Top 25mm Bottom 50mm |
| | PCB Warp | ±3mm |
| Optical
Parameter | Resolution | 12μm(Standard)
5μm/10μm/15μm,Option | | Speed | 0.25 sec/FOV |
| | Camera Spec. | 12M High Speed Color Camera |
| | Optical Lens | Telecentric Optical Lens |
| | Light-Source | Multis pectral Super speed RGB+W Light Source |
| | Inspection Category | Component Inspection | Missing, Rolling, Shifting, Polarity Error, Wrong Part, Damaged, Bended, PCB Abnormal, Residua, Glue Overflow | | Solder Inspection | Excess Solder, Insufficient Solder，Bridging，Lifting，Solder Balls，Soldering Abnormal |
| | Special Inspection Items | Can Check Solder Paste and Epoxy Glue Process, Soldering Quality; Checking Floating Componebts Cold Joint by 3D |
| | Hardware | X，Y Table Positioning Accuracy | ±0.01mm | | X，Y Table Speed | 1000mm/s |
| | PCB Loading | Defined Mode: R->L / L->R,L->L,R->R (Standard) |
| | PCB width adjustment | By AUTO + By Manual (Standard) |
| | Main Frame Body | Whole Cast Iron |
| | Screwing-shaft | High precision ball screw |
| | Rail | High Level Rail |
| | Driver | AC Servo Motor |
| | OperatingSystem | Win 7 Professional |
| | Display | 22” LCDs |
| | PowerSupply | AC 200-240V1Φ 50/60HZ Single-phase |
| | Power | 1.7KW |
| | Pressure | 0.5MPa |
| | Dimension (W*D*H) | 1157x1433x1548mm |
| | Weight (KG) | 1580KG +/- 10KG |
| | Software | InspectionMethod | The Eigenvector Analysis & OCV Silkscreen Algorithm | | InspectionAngleArea | 0-360°，Accuracy=1° |
| | MarkingFunction | One Board Marking & Multi-pieces Board Marking & Bad Marking, etc. |
| | ProgrammingMode | 1.CAD Coordinate Loading 2.Component Database Auto-index
3.Auto-programmingby Intelligent Software |
| | RemoteControl | Network Monitoring: Offline Debugging, Online Monitoring & Manipulating, Remote Realized Examing |
| | DataRecording | Auto-generated Statistical Process Controlling Data (SPC) & Report |
| | Option | Barcode Scanner 1D/2D (H/W) | Light Source Corrector | | Quality Tracing (Option) | Offline Programming System (PC) |
| | Three-point-verification System (Option) | MES/Shop Floor |
| | The above contents are subject to change without further notice! |
JTA-JUTI-DXL | Model | JTA-JUTI-DXL |
| | PCB Spec. | PCB Dimension | Double Rail 50x50mm-620x300mm
Single rail 50x50mm-620x690mm | | PCB Thickness | 0.5mm – 5mm(Standard) |
| | PCB Component height | Top 25mm Bottom 50mm |
| | PCB Warp | ±3mm |
| Optical
Parameter | Resolution | 12μm(Standard)
5μm/10μm/15μm,Option | | Speed | 0.25 sec/FOV |
| | Camera Spec. | 12M High Speed Color Camera |
| | Optical Lens | Telecentric Optical Lens |
| | Light-Source | Multis pectral Super speed RGB+W Light Source |
| | Inspection Category | Component Inspection | Missing, Rolling, Shifting, Polarity Error, Wrong Part, Damaged, Bended, PCB Abnormal, Residua, Glue Overflow | | Solder Inspection | Excess Solder, Insufficient Solder，Bridging，Lifting，Solder Balls，Soldering Abnormal |
| | Special Inspection Items | Can Check Solder Paste and Epoxy Glue Process, Soldering Quality; Checking Floating Componebts Cold Joint by 3D |
| | Hardware | X，Y Table Positioning Accuracy | ±0.01mm | | X，Y Table Speed | 1000mm/s |
| | PCB Loading | Defined Mode: R->L / L->R,L->L,R->R (Standard) |
| | PCB width adjustment | By AUTO + By Manual (Standard) |
| | Main Frame Body | Whole Cast Iron |
| | Screwing-shaft | High precision ball screw |
| | Rail | High Level Rail |
| | Driver | AC Servo Motor |
| | OperatingSystem | Win 7 Professional |
| | Display | 22” LCDs |
| | PowerSupply | AC 200-240V1Φ 50/60HZ Single-phase |
| | Power | 2.2KW |
| | Pressure | 0.5MPa |
| | Dimension (W*D*H) | 1157x1433x1548mm |
| | Weight (KG) | 1580KG +/- 10KG |
| | Software | InspectionMethod | The Eigenvector Analysis & OCV Silkscreen Algorithm | | InspectionAngleArea | 0-360°，Accuracy=1° |
| | MarkingFunction | One Board Marking & Multi-pieces Board Marking & Bad Marking, etc. |
| | ProgrammingMode | 1.CAD Coordinate Loading 2.Component Database Auto-index
3.Auto-programmingby Intelligent Software |
| | RemoteControl | Network Monitoring: Offline Debugging, Online Monitoring & Manipulating, Remote Realized Examing |
| | DataRecording | Auto-generated Statistical Process Controlling Data (SPC) & Report |
| | Option | Barcode Scanner 1D/2D (H/W) | Light Source Corrector | | Quality Tracing (Option) | Offline Programming System (PC) |
| | Three-point-verification System (Option) | MES/Shop Floor |
| | The above contents are subject to change without further notice! |
Product Description
JUTI-X Intro:
● High cost performance in line AOI
● 5 Mega-pixel high-speed camera
● Resolution 10um (12um,15um is option) JTA-JUTI-MX Intro:
● Super speed, high-precision
● High resolution
● FPC special detection logic
● Message communication between front and rear of oven
● Defect analysis
● Professional SPC data analysis and processing
● Centralized management, reduce manpower
● Multiple machines remote debugging and program updates
● Optional dual-rail JTA-JUTI-DX Intro:
● Special detection logic for smart phone
● Equipment compatibility, message communication
● Super speed, high-precision, high resolution
● Analysis of defective process
● SPC data analysis and processing
● Centralized management, reduce manpower
● Multiple machines remote debugging and program updates
|
|
